Eogifee UC9050T Ceiling Fan Wall Control Review
A replacement three speed wall control for ceiling fans using the UC9050T or CHQ9051T system, set by four DIP switches. Transmitter only, no receiver.
| Type | Ceiling fan wall control transmitter |
|---|---|
| Systems | UC9050T and CHQ9051T |
| Receiver | Not included |
| Fan speeds | 3, high, medium and low |
| Power control | Single main power button |
| Light control | Dimmer on incandescent, on and off on LED |
| Best for | Replacing a lost or failed wall control on a fan with a compatible receiver fitted |
Product Overview
Start with the thing Eogifee puts first on its own listing: this is only a transmitter. There is no receiver in the package. A ceiling fan controlled this way has two halves, a receiver wired up inside the fan canopy and a wall control that talks to it, and this product is the second half alone.
That makes it a specific purchase rather than a general one. If your wall control has been lost, broken or painted over during work, and the fan still has its receiver, this replaces it. If you are trying to add wall control to a fan that never had it, this will not do that and you need a kit with both halves.
It covers the UC9050T and CHQ9051T systems, giving three fan speeds, a main power button and a light dimmer button from a wall mounted panel.
Score Breakdown
This verdict is based on the manufacturer's stated specifications, the current Amazon listing and its product images, the confirmed materials and design, real buyer ratings, and our research into the product category. Scores are consistent editorial judgments, not laboratory measurements, and we did not receive a paid sample.
Key Features
High, medium and low from a single fan button, which is the full working range on most ceiling fans.
One button cuts or restores power to the fan and light together, separate from the speed selection.
Four switches on the back are slid with a pen to match the original control's pattern, which is how the new unit reaches the existing receiver.
Works as a replacement for both the UC9050T and CHQ9051T wall controls rather than a single model.
Fixed in the switch position rather than a handheld remote, so there is nothing to lose down the side of a sofa.
Eogifee describes connecting three wires and fitting the panel, with the circuit isolated at the fuse or breaker first.
Design and Build Quality
The panel is white and wall mounted, replacing the existing control plate. Eogifee describes the fitting as three wires connected according to the instructions, then the panel installed, and is explicit that the power must be off first by removing the fuse or switching the circuit breaker.
Pairing is done with four DIP switches on the back. You slide them with a pen to match the pattern on the original wall control, which is how the new transmitter speaks to the receiver already in the fan. That means you need either the old control to copy, or access to the receiver's own switches, before this will work.
Controls are a fan button cycling three speeds, a main power button, and a light dimmer button.
Performance in Everyday Use
The fan side is straightforward: high, medium and low speeds, plus a single button for main power. For most ceiling fans that is the full set of useful functions from a wall plate.
The light side has a real catch. Eogifee states the dimmer button only controls brightness on incandescent bulbs. If the fixture holds LED bulbs, which most now do, the same button becomes an on and off switch with no dimming at all. That is a significant limitation to understand before buying, because it is the opposite of what a dimmer button implies.
There is one more stated limit: fan direction cannot be reversed from this control. The summer and winter reverse function, where fitted, stays on the switch on the fan body itself. For anyone who changes direction seasonally that means still getting the ladder out.
How It Performs: The Evidence
| Decision factor | What we found | Evidence and measurement | Score | Why it matters |
|---|---|---|---|---|
| Completeness | Half of a two part system | Manufacturer: it is only a transmitter, the package does not include a receiver | 5.0 | Without a compatible receiver already in the fan, this control does nothing at all. |
| Fan control | The standard working set | Manufacturer: fan button controls 3 speeds, plus a main power button | 8.5 | Three speeds and power covers what a wall plate is normally used for. |
| Light dimming | Incandescent only | Manufacturer: dimmer controls brightness of incandescent lights; with LED bulbs it controls on and off | 5.0 | Most fan lights now hold LED bulbs, so the dimmer button will not dim for many buyers. |
| Reverse function | Not available | Manufacturer: reverse cannot be changed with remote | 5.5 | Seasonal direction changes still require reaching the switch on the fan body. |
| Pairing | Manual but clear | Manufacturer: 4 dip switches set to match the pattern on the original wall control | 8.0 | Copying the old control's pattern is reliable, provided you still have the old control. |
| Installation | Described step by step | Manufacturer: turn off power, connect 3 wires per instructions, install the panel | 8.0 | Clear instructions matter on a job that involves isolating a circuit first. |
Who Should Buy It
- A wall control lost during decorating
- A failed original UC9050T or CHQ9051T control
- Fans already fitted with a compatible receiver
- Replacing a handheld remote with a fixed wall panel
- Adding wall control to a fan without a receiver, or dimming LED bulbs
- No receiver included, so it only suits a fan already fitted with one
- Light dimming works on incandescent bulbs only, not LEDs
- Fan direction cannot be reversed from this control
- Needs mains wiring with the circuit isolated first
Full Specifications
How It Compares
| Feature | Eogifee | Typical option | Higher-tier option |
|---|---|---|---|
| Receiver included | No | No | Yes, full kit |
| Fan speeds | 3 | 3 | 3 to 6 |
| Light dimming | Incandescent only | Incandescent only | LED compatible |
| Reverse control | Not supported | Not supported | Supported |
| Pairing | 4 DIP switches | DIP switches | Automatic pairing |
| Form | Wall panel | Wall panel | Handheld remote |
| Installation | 3 wires | Wired | Wired |
Alternatives Worth a Look
<p>Judged as what it is, a replacement transmitter for an existing UC9050T or CHQ9051T system, this does the job. Three speeds, a power button and DIP switch pairing is the standard set, and matching the old control's switch pattern is a straightforward way to pair it.</p><p>Judged as anything else it will disappoint. No receiver is included, LED bulbs get on and off rather than dimming, and fan direction stays on the fan. Confirm your receiver model and your bulb type before ordering, because two of those three limits are easy to miss.</p>
Frequently Asked Questions
Does this come with a receiver?
No. Eogifee states clearly that this is only a transmitter and the package does not include a receiver. It replaces a wall control on a fan that already has one fitted.
Will it add remote control to my fan?
No. A fan without a compatible receiver cannot be controlled by this unit. You would need a kit containing both the receiver and the control.
Can it dim my LED bulbs?
No. Eogifee states the dimmer button controls brightness on incandescent lights only. With LED bulbs the same button works as on and off.
Can I reverse the fan direction with it?
No. The maker states reverse cannot be changed with the remote, so the direction switch on the fan body is still the only way.
How do I pair it with my fan?
Using the four DIP switches on the unit. You slide them with a pen so the pattern matches the one on your original wall control.
What if I no longer have the original control?
You need its DIP pattern from somewhere, either the old control or the receiver itself. Without matching the pattern the new control will not reach the receiver.
Which systems does it replace?
The UC9050T and the CHQ9051T wall controls.
How is it installed?
Eogifee describes isolating the power by removing the fuse or switching off the breaker, connecting three wires per the instructions, then fitting the panel.
Do I need an electrician?
This is mains wiring. Isolate the circuit first, and use a qualified electrician where your local rules require one for fixed wiring work.
How many speeds does it give?
Three, high, medium and low, selected on the fan button, with a separate button for main power.
This review is based on the manufacturer's stated compatibility, controls, DIP switch setup, installation notes and limitations, the current Amazon listing and its images, the confirmed brand and product details returned by Amazon's own product data, and our research into ceiling fan controls. Scores are consistent editorial judgements. We did not install or wire this control, and we did not receive a paid sample. Mains wiring should be done with the circuit isolated, and by a qualified electrician where local rules require it.