Tools & DIY How to Choose SDS Plus Bits for Concrete Drilling
P
By the Pickpedia Team
·1 picks compared
·Last verified October 2026
Affiliate disclosure: As an Amazon Associate, Pickpedia earns from qualifying purchases. Links on this page are paid links, and we may earn a commission at no extra cost to you. This never affects our picks or scores.
Concrete drilling rewards the right bit and hammer pairing. Get the shank, size and tip material right and holes come fast and clean. Here is how to choose SDS Plus bits with confidence.
Confirm your hammer takes SDS Plus
SDS Plus is a specific shank standard for rotary hammers. Check your tool before buying. A dedicated SDS Plus drill bit set only fits hammers with the matching chuck, not standard three-jaw drills.
Pick the right diameter
Match the bit to your anchor or fixing size. For repeat work at one diameter, a bulk single-size pack saves money and downtime. For varied jobs, choose a mixed set instead.
Check the tip material
Tungsten carbide tips handle concrete, block and stone. A ground angle like 135 degrees starts holes cleanly. Better carbide grades resist wear, which matters over long drilling sessions.
Let the hammer do the work
Rotary hammer action breaks up concrete for you. Use steady pressure, not force. Pull the bit back occasionally to clear dust and keep the flutes cutting efficiently.
Keep spares on hand
Bits dull on abrasive concrete. Bulk packs of one size mean you swap fresh and keep working. Store bits dry to protect the carbide tips between jobs.
The bottom line
Confirm the shank, match the diameter and pick good carbide. Let the hammer break the material and keep spares nearby. That combination turns tough concrete drilling into a steady, repeatable job.
How to Choose SDS Plus Bits for Concrete Drilling at a glance
Why you can trust this guide
We compared these picks using verified manufacturer specifications, current retailer listings, and patterns in owner feedback, alongside editorial research. We focus on measurable differences such as performance, capacity, usability, and build quality. Pickpedia does not present editorial research as laboratory testing, and we do not claim hands-on testing unless it was actually performed.
Our top picks
This set delivers ten 3/8-inch SDS Plus bits, each about 6 1/3 inches long, for repeat drilling into concrete, block, cement, porcelain tile, stone, brick and wood. YG8 tungsten carbide tips ground at 135 degrees aim for durability and precision. The SDS Plus shank drops into rotary hammers for quick, secure changes on heavy-duty work.
Pieces10
Diameter3/8 inch
LengthAbout 6 1/3 inches
Tip materialYG8 tungsten carbide
Tip angle135 degrees
ShankSDS Plus
ToolRotary hammers
MaterialsConcrete, block, tile, stone, wood
Pros
- Ten matching bits for spares
- YG8 tungsten carbide tips
- SDS Plus shank swaps fast
- Handles concrete, block and tile
- 135-degree grind for clean starts
- Robust build resists breakage
Cons
- Only one diameter included
- Not for mixed-size jobs
- Requires an SDS Plus hammer
- Specs are maker-stated, not tested
Read our full review → Check price on Amazon ›
Note: Availability and specifications change often. Always confirm the current details on Amazon before buying.
