WORKPRO 6 Inch Magnetic TPU Vise Jaw Pads with Dual-Sided V-Groove and Flat Design Review
Soft TPU vise pads with built-in magnets, V-grooves on one face and a flat grid surface on the other
| Length | 6 inch |
|---|---|
| Material | TPU |
| Hold | Dual built-in magnets |
| Grooves | V-groove at 0°, 45° and 90° angles |
| Other face | Flat grid surface |
| Weight | 12.66 oz |
| Best for | Woodworkers and hobby machinists who clamp finished wood, soft metal or plastic parts and want to avoid marring them |
Product Overview
These WORKPRO jaw pads are protective liners for a bench vise. Each pad is 6 inch long, with a dual-sided design: the V-groove face grips round stock at 0°, 45° and 90° angles, while the flat grid face handles boards and other flat material.
The pads are made of TPU, described as durable yet soft, so the vise does not leave dents or scratches on wood, metal or plastic. Built-in magnets, listed as dual, hold the pads in place so they do not fall off, shift or slide while you tighten the vise.
The set weighs 12.66 oz and is listed as fitting most standard bench vises. The color is blue and the model is W033103AE.
The listing positions them for woodworking, drilling, metalwork, tool repair and use with clamps, pliers and small parts, and mentions drill press and bench clamp setups.
Score Breakdown
This verdict is based on the manufacturer's stated specifications, the current Amazon listing and its product images, the confirmed materials and design, real buyer ratings, and our research into the product category. Scores are consistent editorial judgments, not laboratory measurements, and we did not receive a paid sample.
Key Features
V-groove and flat.
Prevents marring.
Stay put.
For round stock.
For flat boards.
Easy to handle.
Design and Build Quality
Magnets are the practical feature here. Loose rubber or cork liners fall off whenever you open the vise, while magnetic ones stay on the jaw and can be flipped or swapped in a second.
V-grooves cradle dowels, pipe and round bar, with the groove angles handling straight and angled holds. The flat grid face spreads pressure across a board and grips without slipping.
TPU sits between rubber and hard plastic. It is soft enough to protect finished surfaces, but it will compress and eventually wear if you crank down on sharp-edged metal.
Performance in Everyday Use
The big benefit is protecting the workpiece. Bare steel jaws bite into hardwood and soft metals, and a soft pad prevents that, which matters on finished parts and delicate stock.
Magnets only work on steel or iron jaws. If your vise has aluminum or plated non-magnetic faces, the pads will not stay on by themselves.
The listing gives no clamp force rating, so use them for light to moderate work, and check round stock is seated in the groove before tightening.
How It Performs: The Evidence
| Decision factor | What we found | Evidence and measurement | Score | Why it matters |
|---|---|---|---|---|
| Material | Soft TPU | Listing description | 9.0 | Avoids marring |
| Attachment | Dual built-in magnets | Listing description | 8.6 | Stays on the jaw |
| Round stock | V-grooves at three angles | Listing description | 8.8 | Secure hold |
| Flat stock | Grid surface | Listing description | 8.4 | Grips boards |
| Weight | 12.66 oz | Listing description | 8.4 | Easy handling |
| Fit | Most standard bench vises | Listing description | 7.4 | Check jaw width |
| Capacity | Not listed | Listing gap | 6.4 | Light work only |
Who Should Buy It
- Woodworking
- Drill press clamping
- Metalwork
- Tool repair
- Small parts
- Finished stock
- Heavy metal fabrication that needs hardened jaws, or vises with non-magnetic aluminum or plastic jaws
- Magnets need steel vise jaws
- TPU wears under heavy clamping
- No clamping capacity listed
- Only suited to light and moderate work
- Pad thickness is not stated
Full Specifications
How It Compares
| Feature | WORKPRO | Typical option | Higher-tier option |
|---|---|---|---|
| Attachment | Magnetic | Loose | Adhesive |
| Material | Soft TPU | Rubber | Cork |
| Grip faces | Groove and flat | Flat only | Flat only |
| Protection | High | Medium | Medium |
| Wear | Moderate | Moderate | Fast |
| Jaw type | Steel only | Any | Any |
Alternatives Worth a Look



A handy, magnetic pad set that protects finished work. Check that your vise jaws are steel and wide enough.
Frequently Asked Questions
How long are the pads?
They are 6 inch long.
What are they made of?
Soft TPU.
How do they stay on the vise?
With dual built-in magnets.
What do the V-grooves do?
They hold round objects at 0°, 45° and 90° angles.
What is the flat side for?
A flat grid surface for clamping boards and flat materials.
Will they work on aluminum jaws?
Not by magnet, since the pads need steel jaws.
How much do they weigh?
The set weighs 12.66 oz.
This review is based on the product listing and manufacturer data, along with our own research on vise jaw pads. It is not based on independent testing. Scores are editorial judgments built from the details the listing provides, such as material, magnets and groove design, and should be read as a comparison with typical alternatives rather than as measured results.