Pelican M50 Micro Case, IP67 Waterproof and Crushproof, Blue and Clear Review
A compact blue and clear hard case with an O-ring seal, pressure valve and dual latches for phones, cameras and small gear
| Protection | IP67, 1 meter for up to 30 minutes |
|---|---|
| Exterior size | 8.10 x 5.50 x 2.90 inches |
| Interior size | 7.30 x 4.30 x 2.40 inches |
| Seal | O-ring gasket, automatic pressure valve |
| Closure | Dual latches, padlock hole |
| Liner | Removable no-slip bottom liner |
| Best for | Protecting a phone, action camera, memory cards or batteries from water, dust and crushing on trips and outdoors |
Product Overview
The Pelican M50 Micro Case is a small, rugged hard case. The listing says it is waterproof, crushproof and dustproof, with IP67 protection that allows submersion under 1 meter of water for up to 30 minutes in accordance with IP67 test parameters.
Sealing relies on an O-ring gasket, and an automatic pressure equalization valve balances interior pressure so the lid can be opened after altitude or temperature changes. Dual latches and a padlock hole add security.
The exterior measures 8.10 by 5.50 by 2.90 inches and the interior 7.30 by 4.30 by 2.40 inches. The listing gives the weight as .85 lbs, while the data lists 0.65 pounds.
It suits phones, cameras, GoPro-style devices, batteries and other small electronics. The case is made in the USA and comes with the Pelican Lifetime Guarantee. The part number is M500-0260-100.
Score Breakdown
This verdict is based on the manufacturer's stated specifications, the current Amazon listing and its product images, the confirmed materials and design, real buyer ratings, and our research into the product category. Scores are consistent editorial judgments, not laboratory measurements, and we did not receive a paid sample.
Key Features
Waterproof and dustproof.
Automatic equalization.
Watertight.
Plus padlock hole.
Removable.
Lifetime guarantee.
Design and Build Quality
A rigid shell with a gasket seal is the standard approach for protecting electronics from water and impact. A removable no-slip bottom liner stops contents sliding around and cushions them lightly.
The pressure equalization valve is important on a sealed case, since without it the lid can be hard to open after a flight or temperature change. It also helps avoid stress on the seal.
A padlock hole lets you lock the case for security, though the clear and blue shell is more about visibility than theft prevention.
Performance in Everyday Use
IP67 means protection from temporary immersion, not continuous diving. For kayaking, beach days and rain, that is plenty. Always close both latches fully and check the gasket is clean before closing the lid.
The interior fits a modern phone with a slim case, a compact camera or a few small items. Measure your gear against the interior size before buying.
Add foam or padding for fragile items, since the shell protects from crush but gear can still rattle inside.
How It Performs: The Evidence
| Decision factor | What we found | Evidence and measurement | Score | Why it matters |
|---|---|---|---|---|
| Rating | IP67, 1 meter for 30 minutes | Listing description | 9.2 | Reliable immersion rating |
| Seal | O-ring and pressure valve | Listing description | 9.0 | Watertight and easy to open |
| Latches | Dual with padlock hole | Listing description | 8.4 | Secure |
| Interior | 7.30 x 4.30 x 2.40 inches | Listed size | 7.0 | Small |
| Liner | Removable no-slip | Listing description | 8.0 | Holds gear |
| Warranty | Lifetime | Listed guarantee | 9.4 | Long cover |
| Weight data | Two figures | Conflicting text | 6.4 | Minor inconsistency |
Who Should Buy It
- Phones
- Action cameras
- Memory cards
- Batteries
- Kayaking
- Beach trips
- Large cameras or lenses, or anyone who needs more than a compact case
- Small interior
- Two different weights are listed
- No foam padding is mentioned
- IP67 is not for continuous diving
- Gear can rattle without padding
Full Specifications
How It Compares
| Feature | Pelican | Typical option | Higher-tier option |
|---|---|---|---|
| Water protection | Submersible rating | Splash only | Splash only |
| Seal | O-ring and valve | Foam gasket | Gasket |
| Closure | Dual latches | Snap | Snap |
| Size | Compact | Large | Medium |
| Warranty | Lifetime | Short | Limited |
| Origin | Made in the USA | Imported | Imported |
Alternatives Worth a Look



A tough, well-sealed micro case for phones and small gear. Check the interior size before you buy.
Frequently Asked Questions
How waterproof is it?
IP67, submersible under 1 meter for up to 30 minutes.
How big is the interior?
7.30 x 4.30 x 2.40 inches.
Does it have a pressure valve?
Yes, an automatic pressure equalization valve.
Can I lock it?
Yes, there is a padlock hole.
What can I store in it?
Phones, cameras, GoPro-style devices and batteries.
Where is it made?
In the USA.
What is the guarantee?
A lifetime guarantee.
This review is based on the product listing and manufacturer data, along with our own research on waterproof hard cases. It is not based on independent testing. Scores are editorial judgments built from the details the listing provides, such as IP rating, seal design and dimensions, and should be read as a comparison with typical alternatives rather than as measured results.