Orbram Cat 8 Ethernet Cable, 100 ft Review
A 100 foot Cat 8 shielded Ethernet cable from Orbram, rated for up to 40 Gbps over a 2000 MHz bandwidth with 24K gold-plated RJ45 connectors.
| Brand | Orbram |
|---|---|
| Cable category | Cat 8 |
| Length | 100 ft |
| Max throughput | 40000 Mbps (40 Gbps) |
| Bandwidth | Up to 2000 MHz |
| Shielding | 4 pair S/FTP |
| Best for | Buyers running a long network, server or gaming connection who want Cat 8 bandwidth over a full 100 foot run |
Product Overview
This is a 100 foot Cat 8 shielded Ethernet cable built for high-bandwidth wired networking: modems, routers, gaming consoles, NAS devices and PCs. Orbram rates it for up to 40000 Mbps of throughput and up to 2000 MHz of bandwidth.
The cable uses a flat, nylon braided exterior in black, designed to resist tangling while running along walls, floors or corners.
Score Breakdown
This verdict is based on the manufacturer's stated specifications, the current Amazon listing and its product images, the confirmed materials and design, real buyer ratings, and our research into the product category. Scores are consistent editorial judgments, not laboratory measurements, and we did not receive a paid sample.
Key Features
Up to 40000 Mbps across a 2000 MHz bandwidth.
4 shielded foiled twisted copper pairs reduce crosstalk and interference.
24K gold plating on connectors at both ends.
Double braided nylon exterior resists tangling along walls and corners.
Built to be bent repeatedly without failure.
Design and Build Quality
Inside the braided jacket, Orbram uses 4 shielded foiled twisted copper pairs, described as S/FTP construction, with 24K gold-plated RJ45 connectors crimped on both ends. Orbram states this shielding and twist quality improves protection against crosstalk and interference versus a Cat 7 cable.
The flat profile is built to be bent at least 10 thousand times without failure, and the double braided nylon exterior is intended to resist fraying over repeated use.
Performance in Everyday Use
Orbram rates the cable for up to 40000 Mbps, or 40 Gigabit per second, over a 2000 MHz bandwidth, positioning it for server applications, cloud storage, HD video streaming and gaming. The listing states it is widely compatible with Cat5, Cat5e, Cat6 and Cat6A equipment, so it can be used to upgrade an existing network without replacing other hardware.
How It Performs: The Evidence
| Decision factor | What we found | Evidence and measurement | Score | Why it matters |
|---|---|---|---|---|
| Throughput rating | Up to 40000 Mbps | Listing states performance of up to 40000 Mbps, or 40 Gigabit per second | 8.6 | A named throughput figure confirms the real bandwidth ceiling |
| Bandwidth rating | Up to 2000 MHz | Listing states high bandwidth of up to 2000 MHz | 8.4 | A stated MHz rating confirms this meets Cat 8 specification |
| Shielding construction | 4 shielded foiled twisted pairs | Listing states made of 4 shielded foiled twisted pair (S/FTP) copper wires | 8.3 | A described shielding method confirms interference resistance is structural |
| Connector plating | 24K gold-plated RJ45 | Listing states 24K gold-plated RJ45 connectors on each end | 8.2 | A named plating spec confirms connector quality |
| Length | 100 ft | Listing states 100 ft length | 8.0 | A confirmed length verifies the cable suits long network runs |
| Bend durability | 10 thousand+ bends | Listing states the patch cord can be bended at least 10 thousands times | 7.9 | A stated bend-cycle rating confirms long-term flex durability |
Who Should Buy It
- Long runs between a router and a home office or gaming setup
- Server, NAS or cloud storage connections needing high bandwidth
- Upgrading an existing Cat5e, Cat6 or Cat6A network
- Setups needing a flat cable that can run along walls or corners
- Buyers wanting shielded construction to reduce interference
- Buyers who only need a short patch cable between a router and a single device
- At 100 feet, routing and hiding the full length along walls takes real planning
- Flat nylon braided design, which some setups may prefer over a round cable
- Only available in black and the 100 foot length in this listing
- No connector dust caps are mentioned for the RJ45 ends
Full Specifications
How It Compares
| Feature | Orbram | Typical option | Higher-tier option |
|---|---|---|---|
| Cable rating | Cat 8, up to 40 Gbps | Lower Cat 6 rating | Comparable Cat 8 rating |
| Shielding | 4 pair S/FTP shielded | Unshielded twisted pair | Shielded twisted pair |
| Connector plating | 24K gold-plated RJ45 | Standard unplated connectors | Gold-plated connectors |
| Cable shape | Flat, braided nylon jacket | Round rubber jacket | Flat cable design |
| Bend durability | Rated for 10 thousand+ bends | No stated bend rating | Comparable bend rating |
| Backward compatibility | Works with Cat5 to Cat6A gear | Limited to one cable standard | Broad backward compatibility |
Alternatives Worth a Look
Orbram's 100 foot Cat 8 cable combines a 40000 Mbps bandwidth rating, S/FTP shielding, gold-plated connectors and a flexible flat design rated for at least 10 thousand bends. It suits buyers who need Cat 8 speed over a genuinely long run, with the main tradeoff being that 100 feet of cable still needs real planning to route cleanly.
Frequently Asked Questions
What is the maximum speed of this cable?
Orbram rates it for up to 40000 Mbps, or 40 Gigabit per second.
What bandwidth does it support?
Up to 2000 MHz.
Is it shielded?
Yes, it uses 4 shielded foiled twisted copper pairs (S/FTP).
What length does it come in?
100 feet.
Is it compatible with older network equipment?
Yes, it is backward compatible with Cat5, Cat5e, Cat6 and Cat6A equipment.
How durable is the cable to bending?
It is rated to withstand at least 10 thousand bends.
This review is based on Orbram's stated materials, shielding, bandwidth rating and compatibility claims for this specific listing. It is editorial analysis of the specifications as described, not independent throughput or interference testing of this specific cable.