Storage Bins 9 Small Parts Bins for Sorted Screws and Fasteners
P
By the Pickpedia Team
·9 picks compared
·Last verified October 2026
Affiliate disclosure: As an Amazon Associate, Pickpedia earns from qualifying purchases. Links on this page are paid links, and we may earn a commission at no extra cost to you. This never affects our picks or scores.
Quick answer
For screws and fasteners, match the storage to your parts. Fixed-drawer cabinets suit permanent sorting of tiny hardware, wall bins keep mixed parts within reach, and interlocking trays adapt to drawers. Pick by drawer count, mounting style, and whether contents stay put or travel.
9 Small Parts Bins for Sorted Screws and Fasteners at a glance
Why you can trust this guide
We compared these picks using verified manufacturer specifications, available manuals and documentation, current retailer listings, and patterns in owner feedback, alongside editorial research. We focus on measurable differences such as performance, capacity, usability, and build quality. Pickpedia does not present editorial research as laboratory testing, and we do not claim hands-on testing unless it was actually performed.
How we chose: We compared nine small parts organizers across drawer count, mounting options, divider design, and build material to see which sorting method fits different fastener collections.
Sorting screws, nuts, and bolts starts with choosing a format that matches how you work. Some people want dozens of labeled drawers bolted to a wall. Others need trays that reshuffle inside a rolling tool chest.
This roundup spans fixed-drawer cabinets, wall-mounted bins, interlocking trays, and folding cardboard sorters. Each entry is described from its listed specifications and features, with an honest note on where it falls short so you can weigh the tradeoffs before buying.
Our top picks
Made in the U.S.A. from rugged high-impact plastic, this cabinet packs 44 drawers into a frame measuring 20 inches wide by 6 deep by 16 tall. Drawers come in two sizes, with molded dividers built into the cabinet back for splitting screws from washers. Finger-grip pulls and rear stop tabs keep contents from spilling as you slide drawers out. You can stack units securely or wall-mount them using the keyhole slots. Owners lean on it for garages, classrooms, and craft rooms. One limitation: the small drawers are shallow, so bulkier fasteners fill them fast and may not fit tall bolts.
Drawers44
Dimensions20"W x 6"D x 16"H
MaterialHigh-impact plastic
MountingStack or wall-mount
Pros
- Molded dividers included in every configuration
- Rear stop tabs stop spills when opening
- Stackable and wall-mountable
Cons
- Small drawers are shallow for tall bolts
- Fixed drawer sizes limit flexibility
Check price on Amazon ›
IRIS builds this 44-drawer cabinet in the USA from durable, recyclable material, sizing the frame at 7 by 19.5 by 15.5 inches. A mix of large and small drawers lets you categorize screws, nuts, bolts, beads, and building bricks in one place. Built-in grooves let multiple cabinets stack securely, and the unit also mounts to a wall for reach-and-grab access. Reviewers point to the combination drawer layout for fast identification of parts. The honest catch: drawers are not deep, so this suits smaller loose parts rather than heavy or oversized fasteners that need real volume.
Drawers44
Dimensions7"L x 19.5"W x 15.5"H
OriginMade in USA
MountingStackable or wall-mount
Pros
- Combination of large and small drawers
- Recyclable, durable material
- Stacks or wall-mounts to save space
Cons
- Shallow drawers limit bulky parts
- No labels included
Check price on Amazon ›
VEVOR ships 48 open-front bins with a dedicated wall panel, so you skip rigging your own mount. The set splits into 24 small bins at 4 by 4 by 2 inches and 24 large bins at 6.3 by 4 by 3 inches, in different colors for quick sorting. Made from sturdy PP with a pillar-style design, the bins stack as building blocks or hang on the panel in two configurations. Owners run them in garages, craft rooms, and kids' spaces. The tradeoff: open-front bins leave contents exposed to dust, and they will not keep tiny parts secure if the rack is bumped hard.
Bins48 total
Small bin4 x 4 x 2 in
Large bin6.3 x 4 x 3 in
MaterialPP with wall panel
Pros
- Includes dedicated wall panel
- Color-coded small and large bins
- Stack or hang in two configurations
Cons
- Open fronts let dust in
- Loose parts can spill if bumped
Check price on Amazon ›
HORUSDY provides 30 removable bins in a color-coded mix: 9 small red, 9 small blue, and 12 large orange. Bins attach to slat wall display boards and pull off easily to carry to the job. The larger blue bins hold roughly 76 cubic inches while the smaller ones hold about 12, so you can separate bulk fasteners from tiny hardware by color. Built for heavy-duty use, the removable design lets you rearrange your layout as your inventory shifts. One real limitation: the bins depend on slat wall boards, which are not included, so factor in that surface before you commit.
Bins30 removable
ColorsRed, blue, orange
Large capacity76 cubic in
Small capacity12 cubic in
Pros
- Color-coded for quick sorting
- Bins detach to carry to the task
- Two capacity sizes included
Cons
- Needs a slat wall board, not included
- Open bins expose contents to dust
Check price on Amazon ›
This 16-tray set mixes 8 small trays at 3 by 3 by 2 inches with 8 extra-small trays, sized to sort screws, bolts, washers, fuses, and drill bits inside drawers. An interlocking modular design lets you stack them or use them separately, so they adapt to garage drawer organizers, tool carts, and rolling chests. EVA adhesive non-slip pads are included, and you apply them to tray bottoms to stop sliding and protect surfaces. Reviewers note the set pairs with larger tray kits to expand a system. The catch: these are open trays without lids, so they only work inside a closed drawer, not for transport.
Trays16 pieces
Small tray3 x 3 x 2 in
DesignInterlocking modular
ExtrasEVA non-slip pads
Pros
- Interlocking trays reshuffle freely
- Non-slip pads keep trays in place
- Expands with larger tray sets
Cons
- Open trays, no lids
- Only useful inside a closed drawer
Check price on Amazon ›
EXYGLO includes 35 corrugated cardboard bins measuring 12 by 4 by 4.5 inches each, giving you plenty of containers to sort parts, snacks, jewelry, and small hardware. The whole bin lifts and moves together when you need to relocate a group of items. A blank front panel leaves room to write or label so you can find contents fast. Bins ship flat and fold up without tape or staples, then replace easily when worn. Owners use them across garages, offices, and pantries. The obvious limitation: cardboard is not weatherproof or heavy-duty, so oily or sharp fasteners will wear through over time.
Quantity35 bins
Bin size12 x 4 x 4.5 in
MaterialCorrugated cardboard
AssemblyFold, no tape needed
Pros
- Large quantity for sorting many groups
- Ships flat and folds up fast
- Writable front for labeling
Cons
- Cardboard is not weatherproof
- Wears out under oily or sharp parts
Check price on Amazon ›
This cabinet combines large and small drawers so you can store screws, beads, and electronics in one unit rather than choosing a single size. Every drawer arrives with dividers pre-installed, plus extras, letting you sort nails, washers, and screws in the same drawer without them mixing. Rear stop tabs keep drawers from falling out when pulled. It stacks with built-in grooves and wall-mounts through keyhole slots, and the maker includes 6 mounting screws and 54 label stickers. Built from thick impact-resistant PP with foam corners for shipping. The limitation: with so many dividers and labels to set up, initial organizing takes real time before it earns its keep.
DrawersLarge and small mix
DividersPre-installed plus extras
Labels54 stickers
Extras6 mounting screws
Pros
- Dividers pre-installed in every drawer
- Includes labels and mounting screws
- Thick PP with protective shipping foam
Cons
- Initial setup with dividers takes time
- Shallow drawers cap larger parts
Check price on Amazon ›
Jack Boss builds this portable case at 12.8 by 11 by 3.15 inches with a double-sided design that doubles the storage in one unit. It holds 34 compartments with 24 removable dividers that slide on and off to resize spaces for bolts, screws, small parts, and fishing tackle. A transparent lid lets you spot contents without opening, and the smallest compartment measures 2.56 by 2.36 inches. Reviewers point to the detachable double-side layout for oversize capacity in a carry format. It ships with a limited one-year warranty. The tradeoff: as a sealed portable case it holds less total volume than a full drawer cabinet, so it suits a working kit rather than a whole hardware inventory.
Outside size12.8 x 11 x 3.15 in
Compartments34
Dividers24 removable
LidTransparent
Pros
- Double-sided design maximizes capacity
- Transparent lid shows contents
- Removable dividers customize spaces
Cons
- Less total volume than a drawer cabinet
- Best as a carry kit, not full storage
Check price on Amazon ›
A-LuGei packs 69 trays across five sizes: 4 XL, 8 L, 12 M, 15 S, and 30 XS, with the XS trays at 3 by 3 by 1.8 inches and XL at 12 by 6. An interlocking design lets you mix, match, and lock trays into any arrangement that fits your drawer or toolbox. Made from solid durable plastic, the set handles small parts, cosmetics, stationery, and hand tools alike, and it fits shallow drawers and standard toolboxes. Buyers get a 365-day satisfaction guarantee. The honest catch: like all open-tray sets, these have no lids and stay put only inside a closed drawer, so they will not travel loose without spilling.
Trays69 pieces
Sizes5 (XL to XS)
XS tray3 x 3 x 1.8 in
DesignInterlocking
Pros
- Five sizes for fine-grained sorting
- Interlocking layout fully customizable
- Fits shallow drawers and toolboxes
Cons
- Open trays with no lids
- Only stays organized in a closed drawer
Check price on Amazon ›
What to look for
Match the format to your parts
Fixed-drawer cabinets suit a permanent home for sorted screws and fasteners, while open trays adapt inside toolbox drawers. Wall bins keep frequently grabbed parts in sight, and portable cases carry a working kit to the job. Decide whether your hardware stays in one spot or travels before choosing.
Weigh drawer and bin count
More compartments mean finer sorting, but every empty slot is wasted if your collection is small. A 44-drawer cabinet earns its footprint when you separate dozens of fastener types. A handful of larger bins works better for bulk items grouped loosely by category.
Consider mounting and stacking
Stackable grooves and keyhole slots free up bench space by moving storage vertical or onto a wall. Wall-mounted bins and slat-board racks keep parts at eye level. If you rent or move often, freestanding stackable units avoid drilling into walls.
Think about dust, lids, and transport
Open bins and trays leave contents exposed and can spill if bumped, so they belong in closed drawers or stable racks. Cases with lids protect small parts and travel safely. Cardboard bins fold flat and relabel easily but will not survive oily or sharp hardware long-term.
Frequently asked questions
How many drawers do I need for screws and fasteners?
Count how many distinct fastener types you keep. A dozen categories fit a mid-size set, while a full hardware inventory with many sizes benefits from a 44-drawer or 69-tray system. Extra compartments left empty simply waste space.
Are open bins or closed drawers better for tiny parts?
Closed drawers and lidded cases keep small parts secure and dust-free. Open wall bins and trays give faster access but can spill if bumped and collect dust, so reserve them for stable racks or inside a closed drawer.
Can I mount these organizers on a wall?
Several here support it. The Akro-Mils, IRIS, and divider cabinet use keyhole slots, VEVOR ships a wall panel, and HORUSDY bins clip to slat boards. Check whether the mounting hardware or board is included before buying.
Which option travels between jobs?
The Jack Boss double-sided case with a transparent lid is built to carry sorted parts safely. Interlocking tray sets and open bins are better left in a fixed drawer or rack, since they lack lids and can spill in transit.
Do interlocking trays fit any toolbox?
They fit shallow drawers and standard toolboxes, but you should measure your drawer first. The five-size A-LuGei set and 16-piece inihpocv trays let you mix pieces to fill the space, though odd drawer shapes may leave gaps.
Are cardboard bins durable enough for hardware?
Corrugated bins handle light, dry parts and label easily, but they are not weatherproof or heavy-duty. Oily, sharp, or heavy fasteners will wear through cardboard over time, so choose plastic drawers for demanding shop use.
What material holds up best in a garage?
High-impact and PP plastic resist cracking and wipe clean, making them reliable for garages and workshops. Several units here list durable or recyclable plastic construction. Cardboard suits indoor shelf sorting rather than a working garage bench.
Do these organizers come with dividers and labels?
It varies. The Akro-Mils and IRIS cabinets include molded or combination dividers, the divider craft cabinet adds pre-installed dividers plus 54 labels and mounting screws, and the Jack Boss case ships 24 removable dividers. Open tray sets rely on their own compartment walls.
The verdict
Akro-Mils 44-Drawer Plastic Storage Cabine...
9.2/10
For a permanent workshop home, the Akro-Mils 44-drawer cabinet leads on rugged build and molded dividers, with the IRIS cabinet close behind for mixed collections. Choose the divider craft cabinet if you want labels and dividers ready to go. Grab the VEVOR or HORUSDY wall bins for grab-and-go garage parts, the Jack Boss case for carrying a kit, and the A-LuGei or inihpocv trays to customize a toolbox drawer.
Check price on Amazon ›
Our top pick, secure checkout via Amazon
Note: Availability and specifications change often. Always confirm the current details on Amazon before buying.
